AEC 001334-812 V electromagnetic clutch
The AEC 001334-8 electromagnetic clutch provides 12 V controlled engagement for a compatible belt-driven auxiliary hydraulic system. Its documented configuration uses a 150 mm eight-groove Poly-V pulley, a keyed shaft and a 108 Nm static torque rating.
Technical information
| Voltage | 12 V DC |
|---|
| Static torque | 108 Nm |
|---|
| Current draw | 3.7 A |
|---|
| Power | 47 W |
|---|
| Maximum speed | 6,000 rpm |
|---|
| Pulley | 150 mm Poly-V, 8 grooves |
|---|
| Interface | Keyed shaft, DIN 5482 shown |
|---|
| Drawing reference | 45.3 mm axial figure |
|---|
Compatibility matters
Match the exact reference, pulley arrangement, shaft interface, belt path, physical clearances and AEC bracket application. A clutch with the same voltage and torque is not automatically interchangeable.
- Confirm the AEC clutch and bracket-kit references
- Check vehicle, engine and air-conditioning arrangement
- Verify pulley alignment, belt specification and pump duty
Need help confirming the right part?
Send the existing reference, photographs and application details. Our team will check the documented route before confirming supply.
Confirm this clutch for your application →Hydraulic systems can cause serious injury. Installation and commissioning must be completed by a competent person in accordance with the applicable machinery and vehicle requirements.
